Difficulty:
Beginner

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. Failure to do so will result in the design being not same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. I used Gunold Poly star embroidery thread No. 50571 for this design, but you can use any embroidery thread.

I also used rhinestones for the earrings. 1 piece 0.236 inches in diameter and 5 pieces 0.196 inches in diameter, you also need 2 pieces of earrings findings and 4 pieces of small connecting rings for jewelry, glue for rhinestones or glue gun.

Size hoop:
4x4 hoop

Size and stitches in the hoop:
earring left: 1.32x3.52 inches / 6768 stitches
earring right: 1.32x3.52 inches / 6768 stitches

The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3, EMB
Color chart PDF
Copyright PDF
Instructions how to embroider lace PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you