FSL - LACE - FREE STANDING LACE!

Difficulty:
Advanced

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. Failure to do so will result in the design being not same on both sides.

When embroidering, you can use other shades of color, but I do not recommend changing the color from a light shade to a dark shade - for example:
I used a white thread for the first step - so use a white or very light shade - or, I used a very dark shade of thread.
If you change the dark shade to light shade nebo light shade to dark shade - the result of your work can be very different from my original design.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread.

Size hoop:
for large design - 6x10 hoop
for small design - 5x7 hoop

Size part and stitches in the hoop:
Owl large colors: 4.40x8.94 inches /64726 stitches
Owl small colors: 3.41x6.92 inches / 47567 stitches

Owl large one color: 4.40x8.94 inches / 67417 stitches
Owl small one color: 3.43x6.96 inches / 49204 stitches

The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3, EMB
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you