This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
By purchasing this design I declare that I have read the copyright testament / Embroidery By TM - it is available at the bottom of each page.
And I declare that I will not illegally manipulate these designs.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
Baby bonnet on organza 0-4 months - We embroider six parts. These parts are then sewn together on the sewing machine.
How to determine the size, measure from the bottom of one ear lobe through the upper part of the head and lower part of the ear lobe + add 1 inch.
Baby bonnet measures 12.99 inches (33 cm) from side to side and 5.7 inches (14,5 cm) from front to back - for 0-4 months.
Always check the correct size please.Every child is unique and otherwise big.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads. Use very sharp scissors to cut out excess organza. And ribbon.
Here you will find a video tutorial -
Size hoop: 5x7 hoop
Size and stitches :
part 1: 4.98 x 3.60 inches / 5782 stitches
part 2 : 4.80 x 3.60 inches / 6462 stitches
part 3+4 : 5.65 x 4.72 inches / 13011 stitches
part 5+6 : 6.27 x 1.89 inches/ 7670 stitches
PES,DST,EXP,HUS,VIP,JEF,SHV,VP3,XXX,CSD + PDF
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.
LICENSE - Design copyright © Embroidery by TM Designs