This design is not FSL!
This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
By purchasing this design I declare that I have read the copyright testament / Embroidery By TM - it is available at the bottom of each page.
And I declare that I will not illegally manipulate these designs.
This design can also be purchased as FSL: https://embroiderybytm.store/collections/dream-catcher-fsl/products/dream-catcher-tree-of-life-fsl-three-sizes
Use a solid fabric - I do not recommend T-shirts and similar elastic material if you embroider large designs (6x10, 7x12 and 8x12 hoop) I recommend adjusting the thread cutting on the embroidery machine for all designs. I have set the cut length to 10 mm and higher.
I embroidered this design on linen. On the underside I used a Gunold / Stiffy 1640B / Tear-Away / iron-on stabilizer. And a stabilizer from Gunold / Stiffy 1640 / Tear-Away. After embroidering I removed the stabilizers and the design was ironed. If you use a metallic thread - reduce the thread tension on the embroidery machine and also the embroidery speed.
Size hoop and stitches :
1.design: 4x4 hoop - 3.91x3.91 inches / 22904 stitches
2.design: 5x7 hoop - 5x5 inches/ 30056 stitches
3.design: 6x10 hoop - 6x6 inches/ 40263 stitches
4.design: 7x12 hoop - 7x7 inches/ 47083 stitches
5.design: 8x12 hoop - 7.87x7.87 inches/ 53027 stitches
Formats: DST,HUS, JEF,PES,EXP, XXX,VIP, VP3,CSD,EM
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.
LICENSE - Design copyright © Embroidery by TM Designs