This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.
By purchasing this design I declare that I have read the copyright testament / Embroidery By TM - it is available at the bottom of each page.
And I declare that I will not illegally manipulate these designs.
For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.
The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.
I recommend using a felt of 1 to 1.2 mm (0.0394 inch or 0.0472 inch) It is good to use high quality and hard felt. Sewing machine and glue gun , ribbon.
Size hoop :
6x10 hoop and 5x7 hoop
Size and stitches in the hoop 6x10 :
part 1 : 5.82x7.25 inches/36899 stitches
part 2: 5.82x7.25 inches/21270 stitches
part 3: 2 pieces in the hoop- 4.81x8.80 inches/24076 stitches
Size and stitches in the hoop 5x7 :
part 1 : 4.57x5.69 inches/30662 stitches
part 2: 4.57x5.67inches/17399 stitches
part 3: 1 piece in the hoop- 4.97x6.84 inches/9474 stitches - embroidery 2 pieces
Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.
LICENSE - Design copyright © Embroidery by TM Designs